International Oil & Gas Training Academy
  • Home
  • Training Courses

Training Courses

  • ECITB Connected Competence Trade Tests
  • Marine Operations
  • Mechanical Engineering
  • Automation & Process Control
  • Oil & Gas Process Operations
  • Electrical Engineering
  • CompEx Hazardous Areas
  • Renewables
  • Health & Safety
  • Emergency Response
  • Scaffolding
  • Assessor & Verifier Qualifications

ECITB Connected Competence Trade Tests

ECITB Technical Maintenance Trade Tests

ASET offer a range of ECITB Technical Tests for Onshore and Offshore personnel involved in installation, maintenance and inspection of Instrumentation, Electrical & Mechanical technology and Equipment.

Here’s How Technical Tests Work

The first part of a Technical Test examines the individual’s specific job knowledge. Only once that has been successfully concluded, can the practical task-based part of the test go ahead. This focuses not merely on the technical skill being tested, but on the ability to apply that skill safely and efficiently in the operational environment. The outcome of both parts proves whether the candidate’s current skills and knowledge are up to the job in question.

Technical Tests – The Five Stage Process

Enrolment:

An examiner (occupationally competent and specifically trained) enrols the candidate at the ASET ECITB - approved Test Centre to do a specific, named test (or tests) eg ‘Mechanical Joint Integrity - TMJI10 Dismantle, Assemble and Hand Torque Flanged Joints (Dismantle, inspect, prepare, assemble and secure flanged pipework joint)’.

Knowledge Test:

On the day, responding to randomly generated, multiple-choice, online questioning, the candidate’s knowledge of this area of work is rapidly and efficiently tested. Depending on the results they either pass on to the Practical Test, or are referred for training.

Practical Test:

Candidates undertake a highly specified practical assessment in prescribed stages, under observation. Each part of the task must be completed to the required standard. From tools to timing, from process to protective equipment, the Technical Test allows no room for error.

Feedback:

Constructive feedback from the examiner to the candidate is an important part of the Technical Test process.

Certificate Awarded:

If successful against the specified criteria ASET will issue an ECITB Certificate of Achievement, validating for three years the candidates knowledge, skill and ability to perform the task in question.

Range of Technical Tests

  • Electrical Installation – Technical Tests
    • TIE01 Emergency Lighting
    • TIE02 Transformers and Chokes
    • TIE03 Alarm Systems
    • TIE04 Electrical Distribution Systems
    • TIE05 Battery and UPS Systems
    • TIE06 Circuit Protective Devices
    • TIE07 Generators
    • TIE08 AC electrical motors
    • TIE09 DC Electrical Motors
    • TIE10 Lighting Equipment
    • TIE11 HVAC Equipment
    • TIE12 HV Equipment
  • Electrical Maintenance – Technical Tests
    • TEM01 Protection Methods
    • TEM02 Transformers & Chokes
    • TEM03 Electrical Hand Tools
    • TEM04 Electrical Distribution Circuits
    • TEM05 Battery and UPS Systems
    • TEM06 Circuit Protection Devices
    • TEM07 Generators
    • TEM08 AC Electric Motors
    • TEM09 DC Electric Motors
    • TEM10 Lighting Equipment
    • TEM11 HVAC Equipment
    • TEM12 HV Equipment
  • Instrument & Control – Technical Tests
    • TMI01 Pressure Measurement Systems
    • TMI02 Level Measurement Systems
    • TMI03 Flow Measurement Systems
    • TMI04 Temperature Measurement Systems
    • TMI06 Process System Control Valve Assemblies
    • TMI07 Pneumatic Process Controllers
    • TMI08 Reconfiguring Programmable Logic Control Systems
    • TMI09 Dist Control Systems
    • TMI10 Fiscal Metering Systems
    • TMI11 Protection Methods for Inst Hazardous Areas
    • TMI13 Fluid Powered Systems
  • Mechanical Fitting – Technical Tests
    • TMF01 Advanced Measurement for Mechanical Fitters
    • TMF02 Marking out for Mechanical Fitters
    • TMF03 Making and Fitting Mechanical Components
    • TMF04 Assembling Mechanical Components
    • TMF05 Preparing for Installation
    • TMF06 Positioning Plant and Equipment
    • TMF07 Aligning, Levelling and Setting Plant and Equipment
    • TMF08 Installing Drive Systems
    • TMF09 Repairing Faults and Adjusting Mechanical Plant and Equipment
    • TMF10 Diagnosing Faults and Adjusting Live Mechanical Plant and Equipment
    • TMF11 Preparing and Assembling Small Bore Pipework
  • Mechanical Maintenance – Technical Tests
    • TMM01 Maintaining Hydraulic Systems
    • TMM02 Maintaining Pneumatic Systems
    • TMM03 Maintaining Compressed Air Systems
    • TMM04 Maintaining Bearings and Seals
    • TMM05 Maintaining Pumps
    • TMM06 Maintaining Geared Mechanisms
    • TMM07 Maintaining Mechanical Actuating Mechanisms
    • TMM08 Maintaining Belt and Chain
    • TMM09 Maintaining Shafts and Couplings
    • TMM10 Maintaining Clutches
    • TMM11 Maintaining Brake
    • TMM12 Maintaining Valves
    • TMM13 Maintaining Diesel Engines
    • TMM14 Maintaining HVAC Systems
    • TMM15 Diagnosing Mechanical Faults in Explosive Atmospheres
  • MJI – Technical Tests
  • Small Bore Tubing Technical Tests.

How to book?

To discuss or book Technical Trade Tests please contact us either by email or telephone and we can arrange Technical Tests at a mutually convenient time for your organisation and ASET.




OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

Marine Operations

The ASET Marine Centre was the first Nautical Institute Dynamic Positioning Approved centre anywhere in the world and is the only training centre recognised by the International Association of Drilling Contractors for Stability and Semi Submersible and Jack up training.

ASET’s high fidelity simulation uses the very latest Konsberg K-Sim DP NI Class B simulator which features 360 panoramic view and interactive simulation meeting the very latest Nautical Institute standards.

Marine Operations of Self – Elevating Platforms (Jack up rigs) comprises of three leg and four leg Jack up simulation using the latest computer based software technology linked to hydraulically actuated motion, providing exceptional realism to practical training, including dynamic experience of “punch through”.

Ballast Control Simulator Course (stability 3) Ballast Control Simulator Refresher Course ( Stability 4) Civil Aviation Authority (caa) Offshore Aeronautical Radio Operators Certificate Dynamic Positioning Awareness Dynamic Positioning Induction/basic Dynamic Positioning Simulator/advanced Fpso Marine Operations Awareness General Operators Certificate (goc) (gmdss) Marine Operations of Self Elevating Platforms (Jack up Rigs) Marine Operations Of Self–elevating Platforms (jack-up Rigs) Refresher Course Offshore Stability & Ballast Control For Semi-submersibles ( Stability 2) Radiotelephony Restricted Operators Certificate (roc) (gmdss) Stability Theory ( Stability 1)

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

Oil & Gas Process Operations

The ABCOL Oil and Gas Production Training Platform is a live integrated training platform replicating the offshore oil and gas process production and maintenance operations which allows ASET to take production and maintenance technicians to a highly competent level in a real working environment.

The ABCOL Oil and Gas Production Training Platform consists of technology and equipment typically present in an Oil and Gas Production installation.

At the heart of the new control system is the latest release of the Emerson Delta Systems V Distributed Control System (DCS) with Hart fieldbus and Hart wireless instrumentation. The plant has also retained legacy 4-20mA analogue and pneumatic technology enabling delegates to experience the full range of technology current in Oil and Gas and Chemical industries.

The fire and Gas system is controlled by Invensys Triconex Trident plc controlling Combustible and Toxic gas detectors with infra-red and ultra violet technology, heat and smoke detectors, manual alarm calls, all linked to the plant deluge system.

Appreciation Of Isolations - Sirps Awareness Competence In Safe Isolation Of Process Plant And Equipment : City & Guilds Scqf Level 5 Competence In Safe Isolation Of Process Plant And Equipment Refresher Familiarisation Of A Chemical Injection System Flow Measurement Introduction And Appreciation Of Process Control (practical) Introduction To Process Safety Introduction To The Oil And Gas Industry (from Discovery To Refinery) : City & Guilds Scqf Level 4 Proof Testing Safety Instrument Systems (sis) Understanding Of P&id's

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

Emergency Response

ASET’S state of the art Emergency Response Training department uses PISYS simulation which can simulate both onshore and offshore production facilities. The Emergency Response training centre can be used for creating and replicating critical situations in all offshore and onshore environments which include Drill ships, Semi- submersibles, accommodation barges, production platforms and onshore terminals. ASET International Oil and Gas Training Academy is a leading provider of Emergency Management Trainingand Assessment for the Oil & Gas Industry, and has gained an excellent reputation for the quality of training provided. Our Offshore Installation Manager, Control Room Operator and Major Emergency Management Initial Response are OPITO approved.

Our instructors have valuable offshore and onshore emergency management experience operating as OIMs, Production Supervisors and CROs in a variety of situations and are qualified in training, coaching and assessing personnel involved in Emergency Response both offshore and onshore.

Additional Oim Coaching- Controlling Emergencies: City And Guilds Scqf Level 7 Control Room Operator Emergency Response Introduction To Cro Emergency Response Role & Responsibilities: City & Guilds Scqf Level 6 Major Emergency Management Initial Response- Opito Approved Offshore Emergency Response Awareness Oim Controlling Emergencies Rules & Regulations For Offshore Installation Manager: City And Guilds Scqf Level 6

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.

Scaffolding

The ASET Scaffolding Training Centre is SQA and CISRS approved and delivers the full range of CISRS approved course for the North East of Scotland Construction Industry. In addition, the ASET Scaffolding Training Centre is also the only Approved Centre in the North East of Scotland that supports the CITB Scaffolding Apprenticeship Scheme.

Cisrs Advanced Scaffolding Cisrs Advanced Scaffolding Inspection Training Scheme (advanced Sits) Cisrs Operative Training Scheme (cots) Cisrs Scaffolder Refresher Cpd Course Cisrs Scaffolding Inspection Training Scheme (sits) Cisrs Scaffolding Part 1 – Tube & Fitting Cisrs Scaffolding Part 2 - Tube And Fitting Cisrs Scaffolding Supervisor Cisrs Skills Match - Level 2 Tube And Fitting Or System Scaffold Cisrs Two-day Product Knowledge Courses Level 2 Cisrs Skills Match - Tube And Fitting Or System Scaffold

Assessor & Verifier Qualifications

ASET offer SQA approved Assessor and Verifier qualifications covering the following areas:

  • Understanding the principles and practices of assessment
  • Assess occupational competence in the work environment
  • Understanding the principles and practices of internally assuring the quality of assessment
  • Internally assure the quality assessment
Unit L&d9di Sqa Scqf Level 8 Assess Workplace Competence Using Direct And Indirect Methods Unit L&d9di Sqa Scqf Level 8 Internally Monitor And Maintain The Quality Of Workplace Assessment

OUR COURSES

At ASET, we’ve developed over 100 courses that cover virtually all of the main themes of production and maintenance for the oil and gas industries. To find the course that’s right for you or your staff, you can browse by category or search our A-Z listing. Then follow the ‘how to book’ link to reserve places on line, or contact us by email or phone for more details.


BESPOKE TRAINING

Although our 100+ courses cover just about every aspect of production and maintenance training, there will be times when a unique combination of expertise or knowledge is required by a client organisation. When the need arises, we can create bespoke training programmes to meet your specifications. Although training is usually best carried out at our state-of-the-art facilities in Aberdeen, we are also able to provide course programmes at clients’ premises, in Scotland and overseas.


​SPECIALISED PROVISION

  • Upstream Oil and Gas Industry Technician Modern Apprenticeship Training Scheme
  • ASET Short Technical Courses (over 100 courses available)
  • Overseas Company and government sponsored Oil and Gas Technician training programmes (typically 26 weeks or more duration)
  • Customized and tailored Oil and Gas Technician courses to meet specific client needs

HOW TO BOOK A COURSE

Course bookings can be made by email, on this website or by telephone. To do so contact ASET International Oil and Gas Training Academy Administration. Please email us at asetbookings@aset.co.uk.

To ensure you obtain the course dates that meet your requirements, early bookings are recommended as many of our courses are in high demand.

Customer care is our priority, so dates for any of the courses described in this site may be tailored to suit your specific requirements (subject to minimum delegate numbers).


For course bookings, course enquiries, or training requests, please contact us:

T +44 (0)300 330 5559 F +44 (0)1224 859640 E asetbookings@aset.co.uk


Cancellation & Admission Policy

For cancellations please read our cancellation & admissions policy.


ACCOMMODATION

ASET do not offer accommodation, however we have negotiated discounted rates with our dedicated accommodation provider, The Spires Serviced Apartments UK, who offer a variety of accommodation options ranging from 1 - 2 bedroom apartments. 

To book please contact:

Contact Name: Reservations Team

Telephone number: 0345 270 0090

Email address: info@thespires.co.uk

 



 



Training Courses

For course bookings, course enquiries, or training requests, please contact us:

T +44 (0)1224 896196
F +44 (0)1224 859640

E: asetbookings@aset.co.uk