Valve Maintenance & Valve Pressure Testing: Scqf Level 6
Availability
Date | Time | Cost | Venue | Places | |
---|---|---|---|---|---|
19 Sep - 21 Sep 2022 | 08:30 - 16:30 | £623.00 + VAT | Clinterty Centre | 4 |
About this course
This course is a Credit Rated and Levelled course which leads to a formal qualification upon completion. The course is recognised within the SCQF framework and contributes to an individual’s Continued Professional Development (CPD).
Target Audience
Engineers and Technicians from a non-mechanical discipline requiring to gain an understanding and know-how in relation to the fundamentals of carrying out valve maintenance and valve pressure testing. Mechanical Engineers and Technicians wishing to refresh or enhance their existing skills on valve maintenance and valve pressure testing.
Key Learning Outcomes
- Demonstrate an understanding of the principles of safe working.
- Illustrate a knowledge and understanding of the preparation, components and condition of valves, their maintenance, replacement and testing within a mechanical plant.
- Ability to interpret the Health and Safety issues related to valve maintenance and testing.
- Gain an understanding of the types and principles of valves.
Course Content
- Introduction to various common types of valve used in oil & gas industry, typical construction
- Applications, valve pressure rating and flange classes
- Valve repair & servicing in the field and its practical limitations
- Pressure testing requirements for valves. Hydrostatic & pneumatic testing procedures and current standards. Body leak and seat leakage test procedures to current national standards. Acceptance criteria for leak tests. (Delegates own company standards may be introduced here if provided)
- Hazards involved in valve pressure testing and associated risk reduction measures
- Practical valve overhaul & test of a selection from the following valves; ball, gate, globe, diaphragm
Assessment
Each delegate will undertake an open book multiple-choice examination paper to demonstrate they have achieved the key learning outcomes detailed above.
Certification
SCQF Credit Rated & Levelled Certificate.
Required Instructor Qualification/Experience
- SVQ Level 3 in Mechanical Engineering or equivalent
- Minimum 5 years relevant industry experience
- A1 or equivalent Workplace Assessor
- ASET approved Training Instructor
Min/Max Delegates
2/6, course duration and times may vary depending on delegate numbers.
Special Requirements
Delegates are required to supply their own PPE.
Notes to Customers
To set up a course specifically for your company, or if the dates above are not suitable, please contact the ASET Customer Service Team for additional dates.

Course was organised very well. Tutors were very knowledgeable and helpful.
Bart Leyland
Private Delegate
arine “Very good interaction with the class by lecturer. Toby is knowledgeable, experienced and informative individual. His teaching techniques and approach to the subject are clear and precise. Toby has the ability to share the knowledge, technical and practical experience at its best to the students. I will look forward to participating in DP courses in the future.
Tomasz Bak
RelyOn Nutec
The changes to this course very welcome. Ian has time to explain best practice and even corrected a few bad habits he noticed. Very happy this is probably the best course associated with my job.
Gavin Kennedy
Dolphin Drilling
Thoroughly enjoyed the course and the way it was ran. Plenty of opportunities to work as a team and experience the new simulator.
Graham Morgan
Private Delegate
The course instructor was highly knowledgeable, described all methods of the course in a very easy way to understand. Overall excellent.
Ryan Maloney
RFL Electrical
Good well instructed course. Team were excellent and made me fully at ease.
John James Penman
CNR International
Course was very well presented. All tutors were very helpful and friendly.
Michael Rae
NG Bailey Limited
Good course and made very enjoyable through the amount of hands on experience we got.
Cieran Geddes
RelyOn Nutec
Very good course – lots of practical work.
James Stewart
RelyOn Nutec
Well structured. Excellent feedback and advice from the assessor.
Dale Checksfield
Chrysaor E & P Services UK
Instructor was a subject matter expert and a fountain of knowledge.
Robert Briant
RelyOn Nutec
“Highly professional course, very helpful instructors who have delivered substantial relevant knowledge within the scope of all discussed issues/topics and were always there to answer any questions and clarify any uncertainties. I will definitely recommend this course and ASET Training Academy to all my friends and also will be very happy to refresh the course in five years time.
Piotr Kopec
Private Delegate
Excellent course – by far the best I have been on. Good mix of practical and theory. Instructor very knowledgeable and good training method.
Gareth Weston
Dana Petroleum
Course well-presented / managed with COVID restrictions in place.
Allen Price
TAQA Bratani Ltd
Instructors were excellent from start to end. Course was enjoyable – would recommend.
Ben Adams
Dana Petroleum
Excellent course and well instructed. Facilities on campus are excellent.
Craig Mackay
Hexion UK
Found this course very beneficial and I feel I will benefit from the knowledge gained from the instructor on this course in my workplace. Would definitely recommend to others.
William Hadden
Macduff Shellfish Ltd
Excellent course, well presented by the Instructor. Course certainly makes you think (which is good).
Ken Nisbet
RelyOn Nutec
A well run course with the mix of theory and practical. Totally met my expectations. Facilities was very good with plenty of equipment & tools.
Christopher Fitzpatrick
NIIT
Excellent set up and scenarios. Very experienced Instructors.
James McGinley
NIIT
Thoroughly enjoyed the course and feel I have learnt a lot
Nyall Robertson
RelyOn Nutec
Very well explained and detailed course, learnt a lot.
Connor Burnett
Stork Technical Services
A very competent and experienced team. Assessor was first class and his previous experience was very clear. I will recommend ASET to my team and my company for OIM Assessment.
Ryan Fiske
SHELL UK
The course was excellent in delivery and content and I will recommend others for the course.
Stephen Ray
RelyOn Nutec
Excellent materials provided, delivery of content excellent – clear and concise.
Brendan Farren
Private Delegate
Good course produced, great setup of facilities and the instructor was very knowledgeable of all tests received.
Alan Sinclair
Sparrows Group
Excellent course, right duration and opportunity for hands on switching exposure.
Neil Mcbain
Petrofac
Toby has a wealth of knowledge and experience on the subject of DP. He delivers the course very well.
Ryan Palmer
Trinity House
Excellent course which was both interesting and essential to my offshore role, would definitely recommend.
Darren Mcdonald
CNR International
Steve was very helpful, knows what he is talking about and communicates it well. Very good practical side to the course.
Mark Johnston
MJ HVAC ltd
Excellent and informative.
Kevin Mcintosh
Private Delegate
Great coaching from the Instructor who guided me well and shared experiences.
John Weston
RelyOn Nutec
Instructor very experienced and knowledgeable. Good set up in Switch room/training area.
Stuart Mulpetre
RelyOn Nutec
The plant area is an excellent training area. Useful for training in a safe and clean environment.
Tony Coyle
Harbour Energy
Very enjoyable course. Learnt and refreshed a lot of knowledge. Ian explains things very well and makes it easy to understand.
Jamie Wilson
KCA Deutag Drilling
Course was very good. Would recommend to others
Kyle Doig
RelyOn Nutec