• Home
  • Courses
  • Compex 3 Day Mechanical Competence Based Course Unit 11 (including Compex Foundation Module Exf)

Compex 3 Day Mechanical Competence Based Course Unit 11 (including Compex Foundation Module Exf)

Duration 3 days
Time 08:30 - 16:30
Cost £780.00 + VAT
Venue Altens Training Centre

Availability

Date Time Cost Venue Places  
06 May - 08 May 2024 08:30 - 16:30 £780.00 + VAT Altens Training Centre 5
07 May - 09 May 2024 08:30 - 16:30 £780.00 + VAT Altens Training Centre 6
27 May - 29 May 2024 08:30 - 16:30 £780.00 + VAT Altens Training Centre 5
24 Jun - 26 Jun 2024 08:30 - 16:30 £780.00 + VAT Altens Training Centre 5

About this course

Practical Content 30% Theoretical Content 70%

Target Audience

This qualification is suitable for practicing mechanical operatives who are involved in installing, inspecting and maintaining non-electrical (mechanical) equipment in locations where gases, vapours and/or dusts can potentially create a hazardous area.

Key Learning Outcomes

  • Identify the correct national regulations, directives and IEC standards which are applicable to hazardous locations containing non-electrical (mechanical) equipment.
  • Identify the correct criteria and descriptors used to classify a hazardous location.
  • Recognise the correct characteristics of common hazardous gases, vapours and dusts discussed in the course.
  • Demonstrate an understanding of the basic method and requirements for non-electrical equipment for hazardous locations (constructional safety 'c', control of ignition source 'b' and liquid immersion 'k').
  • Demonstrate an understanding of how certified Ex non-electrical equipment maintains its protection concept and how it is to be selected, installed, inspected and maintained.
  • Demonstrate an understanding of required correct equipment selection, e.g. flange, gaskets, bolts and use of current industry flange installation practices.
  • Demonstrate an understanding of leak testing requirements of installed flange arrangements.

Course Content

  • Health and Safety at Work
  • Ex-Protection Methods (Gas & Dust)
  • ATEX Directives
  • Temperature Classifications
  • Permit to Work Systems
  • Inspection & Maintenance
  • Risk Assessment (ATEX compliant and pre-ATEX compliant)
  • Guidelines for determining Mechanical Risk
  • General principles, ignition properties & apparatus protection
  • Mechanical Seals & Bearings
  • Induction to Competence Validation Testing.
  • Standards Certification & Marking
  • Area Classification (Zones/Categories & EPL’s)

Assessment

Each delegate will undertake a multiple-choice examination paper to demonstrate they have achieved the key learning outcomes detailed above.

Certification

CompEx National Certificate of Core Competence.

Required Instructor Qualification/Experience

  • SVQ Level 3 in Electrical Engineering/Instrumentation Engineering or equivalent
  • Industrial experience with electrical and instrumentation equipment in potentially hazardous areas
  • A1 or equivalent Workplace Assessor
  • CompEx approved Training Instructor

Min/Max Delegates

3/6, course duration and times may vary depending on delegate numbers. Individual delegate finishing time will depend on the length of time taken for assessment.

Special Requirements

  • Delegates must supply proof of relevant mechanical industry qualification on starting the course, e.g. vocational qualification/ time-served apprenticeship certificate.
  • Delegates are required to provide their own PPE.
  • PPE Requirements: Safety Footwear, Coveralls, Safety Glasses, Gloves

Notes to Customers

To set up a course specifically for your company, or if the advertised dates are not suitable, please contact the ASET Customer Service Team to enquire about additional dates.

ASET Course Directory
Excellent course with good instructors - the ASET facility was superb!

Martin Butler
Spirit Energy Production UK Limited

Excellent and informative.

Kevin Mcintosh
Private Delegate

The changes to this course very welcome. Ian has time to explain best practice and even corrected a few bad habits he noticed. Very happy this is probably the best course associated with my job.

Gavin Kennedy
Dolphin Drilling

Instructor very experienced and knowledgeable. Good set up in Switch room/training area.

Stuart Mulpetre
RelyOn Nutec

The plant area is an excellent training area. Useful for training in a safe and clean environment.

Tony Coyle
Harbour Energy

Thoroughly enjoyed the course and the way it was ran. Plenty of opportunities to work as a team and experience the new simulator.

Graham Morgan
Private Delegate

The course instructor was highly knowledgeable, described all methods of the course in a very easy way to understand. Overall excellent.

Ryan Maloney
RFL Electrical

ASET have a better lab and knowledge base - they provided a better training experience than other places.

Phillip Hodge
Strathclyde Partnership for Transport

John fulfilled my expectations of the course and I can leave ASET feeling more comfortable completing isolations within my workplace.

Kyle Beveridge

Great update of boards since I came 6 years ago, great facility with huge investments being made.

Simon Wilderspin
Diageo Malt Distilling

A well run course with the mix of theory and practical. Totally met my expectations. Facilities was very good with plenty of equipment & tools.

Christopher Fitzpatrick
NIIT

Very enjoyable course. Learnt and refreshed a lot of knowledge. Ian explains things very well and makes it easy to understand.

Jamie Wilson
KCA Deutag Drilling

Good course and made very enjoyable through the amount of hands on experience we got.

Cieran Geddes
RelyOn Nutec

Great coaching from the Instructor who guided me well and shared experiences.

John Weston
RelyOn Nutec

Tutors, examples, experience and knowledge are an ASET when giving course training.

Steve Howarth
KCA Deutag Drilling Ltd

Excellent course, good opportunity to develop hands on skills - very helpful and approachable staff.

Tristan Gawn
Dana Petroleum

Excellent course – by far the best I have been on. Good mix of practical and theory. Instructor very knowledgeable and good training method.

Gareth Weston
Dana Petroleum

Excellent course, right duration and opportunity for hands on switching exposure.

Neil Mcbain
Petrofac

Steve was very helpful, knows what he is talking about and communicates it well. Very good practical side to the course.

Mark Johnston
MJ HVAC ltd

Course was very well presented. All tutors were very helpful and friendly.

Michael Rae
NG Bailey Limited

Excellent set up and scenarios. Very experienced Instructors.

James McGinley
NIIT

Instructor was a subject matter expert and a fountain of knowledge.

Robert Briant
RelyOn Nutec

Thoroughly enjoyed the course and feel I have learnt a lot

Nyall Robertson
RelyOn Nutec

arine “Very good interaction with the class by lecturer. Toby is knowledgeable, experienced and informative individual. His teaching techniques and approach to the subject are clear and precise. Toby has the ability to share the knowledge, technical and practical experience at its best to the students. I will look forward to participating in DP courses in the future.

Tomasz Bak
RelyOn Nutec

Great course very good instructors, very well presented and made to feel at ease throughout the training I will recommend this course to others!

Kevin Smith
RelyOn Nutec

Good course produced, great setup of facilities and the instructor was very knowledgeable of all tests received.

Alan Sinclair
Sparrows Group

Excellent course which was both interesting and essential to my offshore role, would definitely recommend.

Darren Mcdonald
CNR International

Course was organised very well. Tutors were very knowledgeable and helpful.

Bart Leyland
Private Delegate

Very good course – lots of practical work.

James Stewart
RelyOn Nutec

Excellent course and well instructed. Facilities on campus are excellent.

Craig Mackay
Hexion UK

Very good course with different scenarios. Instructors were good at escalating situations to get you thinking.

Stuart McWhinnie
RelyOn Nutec

Usual high standard of coaching and assessment - see you in 3 years!

Stephen Johnstone
Shell

Really enjoyed this course thoroughly, Ian's teaching style, attitude and approach is first class this was truly and enjoyable course and I got 100% out of it. The instructor delivers the content in a perfect level - I would recommend this!

James Wales
Dolphin Drilling

Kevin was extremely knowledgeable about pressure testing I would highly recommend anyone to take the course from Kevin.

Mark Henderson
Bluewater Services UK

Course well-presented / managed with COVID restrictions in place.

Allen Price
TAQA Bratani Ltd

Excellent materials provided, delivery of content excellent – clear and concise.

Brendan Farren
Private Delegate

“Highly professional course, very helpful instructors who have delivered substantial relevant knowledge within the scope of all discussed issues/topics and were always there to answer any questions and clarify any uncertainties. I will definitely recommend this course and ASET Training Academy to all my friends and also will be very happy to refresh the course in five years time.

Piotr Kopec
Private Delegate

Excellent course, well presented by the Instructor. Course certainly makes you think (which is good).

Ken Nisbet
RelyOn Nutec

As someone with limited knowledge of hydraulics this course was very beneficial. I learnt lots throughout the 3 days!

Josh Rae
Rubberatkins

Very well explained and detailed course, learnt a lot.

Connor Burnett
Stork Technical Services

Great course, very informative and practical. Austin and Graeme are excellent lecturers and a credit to the facility.

Barry McQuade
INEOS FPS Ltd

Found this course very beneficial and I feel I will benefit from the knowledge gained from the instructor on this course in my workplace. Would definitely recommend to others.

William Hadden
Macduff Shellfish Ltd

Great training facilitators, passing on good knowledge and experience in the field on CompEx.

Frederick Sefe
Modec Production Services Ghana

A very competent and experienced team. Assessor was first class and his previous experience was very clear. I will recommend ASET to my team and my company for OIM Assessment.

Ryan Fiske
SHELL UK

Did above and beyond to accommodate me for my booking requirements, instructor was very knowledgeable and passionate on the topic. He also holds first-hand experience in the role.

Chris Catto
Subsea 7

ASET is definetly a world-class training institute this is clearly reflected in the overall course from booking training to completion. Toby is a very experienced teacher and had an excellent way of communicating course details as well as judging which sections needed extra time thank you Toby!

Martin Obray
Saudi Aramco Rowan Offshore Drilling

The course was excellent in delivery and content and I will recommend others for the course.

Stephen Ray
RelyOn Nutec

Course was very good. Would recommend to others

Kyle Doig
RelyOn Nutec

Excellent course for me, first time on a jack up course. Ian is a mine of information on jack ups and semi-subs!

William MacLean
Petrofac Offshore Project and Engineering

Instructors were excellent from start to end. Course was enjoyable – would recommend.

Ben Adams
Dana Petroleum

Good well instructed course. Team were excellent and made me fully at ease.

John James Penman
CNR International

Toby has a wealth of knowledge and experience on the subject of DP. He delivers the course very well.

Ryan Palmer
Trinity House

I thoroughly enjoyed the course, I would like to take further training here on Emergency Response. The instructors demonstrated excellent knowledge and information and made the scenarios as real as possible. It was a great insight and introduction.

Michelle Chalmers
Bureau Veritas


VIDEO TOUR OF FACILITIES


Do you have a login for our booking system?