Digital Online Learning: Hv/lv Safe Working Practices Awareness
About this course
This is a foundation course in preparation for undertaking the full "HV / LV Safe Working Practices Awareness" course at the ASET International Oil & Gas Training Academy
Learning Hours 5.5 Hours
Cost per Delegate £195+VAT
About this Course
This is a digital online course which you can access from any location as long as you have internet access. The flexibility and convenience of digital online learning allows you to work through your training course at your own pace. Confirmation of your booking and the log in details for your digital online course will be sent to the email address provided at the time of booking within 24 hours.
Please note booking confirmations and log in details will only be issued Monday – Friday between the hours of 08:15 – 16:30.
Logins are valid for 14 days from the date you are issued your username and password.
How to Book this Course
To book this course you can email or call the ASET Customer Service Team on:
Telephone number: +44 (0) 300 330 5559
Email: asetbookings@aset.co.uk
Instructions on how to access the digital online course will be issued with your username and password.
Course Structure
This digital online course consists of a Course Introduction followed by individual “Lesson Sections”. Upon completion of each “Lesson Section” you will be taken through a brief multiple choice question and answer session to confirm you have understood the learning subjects within that section. Once you have completed all “Lesson Sections” the final partof the assessment consists of an online multiple choice examination to demonstrate that you have achieved the required learning outcomes.
Target Audience
Personnel with electrical, instrument or mechanical background within industry who require a basic understanding of explosion protection systems.
Key Learning Outcomes
- Awareness in hazardous area concepts for the use of electrical equipment.
- Awareness in protection methods from manufacture to installation, inspection and maintenance.
- Understand and explain the protection methods from manufacture to installation, inspection and maintenance.
Course Content
- Area classification
- Ignition properties
- EN/IEC standards for electrical and instrumentation
- Ingress protection
- Flameproof
- Increased safety
- ‘n’ types of protection
- Pressurization
- Intrinsic safety
- Hybrid protection
Assessment
Each delegate will undertake an open book multiple-choice examination to demonstrate they have achieved the key learning outcomes detailed above.
Pass Rate 80%
Certification ASET International Oil & Gas Training Academy Certificate
The course was excellent in delivery and content and I will recommend others for the course.
Stephen Ray
RelyOn Nutec
Very enjoyable course. Learnt and refreshed a lot of knowledge. Ian explains things very well and makes it easy to understand.
Jamie Wilson
KCA Deutag Drilling
Excellent course and well instructed. Facilities on campus are excellent.
Craig Mackay
Hexion UK
Good course and made very enjoyable through the amount of hands on experience we got.
Cieran Geddes
RelyOn Nutec
Instructor was a subject matter expert and a fountain of knowledge.
Robert Briant
RelyOn Nutec
arine “Very good interaction with the class by lecturer. Toby is knowledgeable, experienced and informative individual. His teaching techniques and approach to the subject are clear and precise. Toby has the ability to share the knowledge, technical and practical experience at its best to the students. I will look forward to participating in DP courses in the future.
Tomasz Bak
RelyOn Nutec
Great coaching from the Instructor who guided me well and shared experiences.
John Weston
RelyOn Nutec
Excellent course, right duration and opportunity for hands on switching exposure.
Neil Mcbain
Petrofac
Very well explained and detailed course, learnt a lot.
Connor Burnett
Stork Technical Services
Very good course – lots of practical work.
James Stewart
RelyOn Nutec
A well run course with the mix of theory and practical. Totally met my expectations. Facilities was very good with plenty of equipment & tools.
Christopher Fitzpatrick
NIIT
Good well instructed course. Team were excellent and made me fully at ease.
John James Penman
CNR International
Excellent course – by far the best I have been on. Good mix of practical and theory. Instructor very knowledgeable and good training method.
Gareth Weston
Dana Petroleum
Thoroughly enjoyed the course and feel I have learnt a lot
Nyall Robertson
RelyOn Nutec
Excellent set up and scenarios. Very experienced Instructors.
James McGinley
NIIT
Well structured. Excellent feedback and advice from the assessor.
Dale Checksfield
Chrysaor E & P Services UK
Steve was very helpful, knows what he is talking about and communicates it well. Very good practical side to the course.
Mark Johnston
MJ HVAC ltd
Course was very well presented. All tutors were very helpful and friendly.
Michael Rae
NG Bailey Limited
Instructor very experienced and knowledgeable. Good set up in Switch room/training area.
Stuart Mulpetre
RelyOn Nutec
Good course produced, great setup of facilities and the instructor was very knowledgeable of all tests received.
Alan Sinclair
Sparrows Group
Course well-presented / managed with COVID restrictions in place.
Allen Price
TAQA Bratani Ltd
Course was organised very well. Tutors were very knowledgeable and helpful.
Bart Leyland
Private Delegate
Excellent course which was both interesting and essential to my offshore role, would definitely recommend.
Darren Mcdonald
CNR International
Toby has a wealth of knowledge and experience on the subject of DP. He delivers the course very well.
Ryan Palmer
Trinity House
Instructors were excellent from start to end. Course was enjoyable – would recommend.
Ben Adams
Dana Petroleum
The changes to this course very welcome. Ian has time to explain best practice and even corrected a few bad habits he noticed. Very happy this is probably the best course associated with my job.
Gavin Kennedy
Dolphin Drilling
The course instructor was highly knowledgeable, described all methods of the course in a very easy way to understand. Overall excellent.
Ryan Maloney
RFL Electrical
The plant area is an excellent training area. Useful for training in a safe and clean environment.
Tony Coyle
Harbour Energy
Course was very good. Would recommend to others
Kyle Doig
RelyOn Nutec
Excellent and informative.
Kevin Mcintosh
Private Delegate
“Highly professional course, very helpful instructors who have delivered substantial relevant knowledge within the scope of all discussed issues/topics and were always there to answer any questions and clarify any uncertainties. I will definitely recommend this course and ASET Training Academy to all my friends and also will be very happy to refresh the course in five years time.
Piotr Kopec
Private Delegate
Excellent course, well presented by the Instructor. Course certainly makes you think (which is good).
Ken Nisbet
RelyOn Nutec
Thoroughly enjoyed the course and the way it was ran. Plenty of opportunities to work as a team and experience the new simulator.
Graham Morgan
Private Delegate
Excellent materials provided, delivery of content excellent – clear and concise.
Brendan Farren
Private Delegate
A very competent and experienced team. Assessor was first class and his previous experience was very clear. I will recommend ASET to my team and my company for OIM Assessment.
Ryan Fiske
SHELL UK
Found this course very beneficial and I feel I will benefit from the knowledge gained from the instructor on this course in my workplace. Would definitely recommend to others.
William Hadden
Macduff Shellfish Ltd
